Author Topic: Introduction to Biofuels  (Read 9045 times)

Jhanananda

  • Administrator
  • Hero Member
  • *****
  • Posts: 2092
  • I blend waste oils with solvents
    • Beyond Biodiesel
Introduction to Biofuels
« on: January 02, 2012, 08:08:00 PM »
Introduction to Biofuels
http://youtu.be/h_9sm6M9WuQ
I have run various blends of waste oils and unleaded gasoline since Feb, 2007 in a 1983 Chevy G-20 van with a 6.2L diesel V-8 engine, with a Stanadyne Rotary DB2 IP. I have started the engine with no difficulty on an 80/20 (WVO/gas) blend down to 3F (-16c).  I now run 60/20/20 (WVO/diesel/gas)

Jhanananda

  • Administrator
  • Hero Member
  • *****
  • Posts: 2092
  • I blend waste oils with solvents
    • Beyond Biodiesel
Re: Introduction to Biofuels
« Reply #1 on: January 02, 2012, 08:08:37 PM »
Introduction to the three types of bio-diesel biofuels
A comparison of Biodiesel, Two-tank SVO systems and Blending
http://youtu.be/UVO0-NPgCIY
I have run various blends of waste oils and unleaded gasoline since Feb, 2007 in a 1983 Chevy G-20 van with a 6.2L diesel V-8 engine, with a Stanadyne Rotary DB2 IP. I have started the engine with no difficulty on an 80/20 (WVO/gas) blend down to 3F (-16c).  I now run 60/20/20 (WVO/diesel/gas)

Jhanananda

  • Administrator
  • Hero Member
  • *****
  • Posts: 2092
  • I blend waste oils with solvents
    • Beyond Biodiesel
Re: Introduction to Biofuels
« Reply #2 on: January 02, 2012, 08:09:14 PM »
Recycling waste oil into Biofuels is the ultimate in recycling
Examining the effect upon the environment of recycling waste oils into diesel fuel
http://youtu.be/qHKrokEEdSs
I have run various blends of waste oils and unleaded gasoline since Feb, 2007 in a 1983 Chevy G-20 van with a 6.2L diesel V-8 engine, with a Stanadyne Rotary DB2 IP. I have started the engine with no difficulty on an 80/20 (WVO/gas) blend down to 3F (-16c).  I now run 60/20/20 (WVO/diesel/gas)